The MGG EFT3 Simple tester to show you what voltage is pulsing through your electric fence.
• Checks electric fence energisers for proper output
• Checks electric fence lines for shorts
• A must for all high-voltage or low-impedance electric fence systems
TESTING THE ELECTRIC FENCE ENERGISER ONLY
i) DISCONNECT the ground and fence terminals from the energiser.
ii) Plug in and turn ON the energiser.
iii) Touch the GROUND PROBE of the MGG Electric Fence Tester to the energiser’s GROUND TERMINAL then touch the FENCE PROBE of the MGG Electric Fence Tester to the energiser’s FENCE TERMINAL and observe the number of lights which illuminate on the tester.
iv) The highest light number illuminated will indicate the energiser’s open-circuit output voltage at no-load conditions.
Caution: To prevent damage to the MGG Electric Fence Tester, the output of high-voltage energisers should be measured for less than 1 minute.
TESTING THE FENCE LINE
i) Energise the fence line.
ii) Push the GROUND PROBE of the MGG Electric Fence Tester into soil near the fence line.
iii) Touch the fence line with the FENCE PROBE of the MGG Electric Fence Tester and observe the number of lights which illuminate on the tester.
iv) The highest light number illuminated will indicate the voltage output of the fence line at that particular point.
v) Repeat steps (i) – (iv) at different locations along the fence line to determine if the output is consistent. Variations in the readings are indicative of a fence line problem.
• Checks electric fence energisers for proper output
• Checks electric fence lines for shorts
• A must for all high-voltage or low-impedance electric fence systems
TESTING THE ELECTRIC FENCE ENERGISER ONLY
i) DISCONNECT the ground and fence terminals from the energiser.
ii) Plug in and turn ON the energiser.
iii) Touch the GROUND PROBE of the MGG Electric Fence Tester to the energiser’s GROUND TERMINAL then touch the FENCE PROBE of the MGG Electric Fence Tester to the energiser’s FENCE TERMINAL and observe the number of lights which illuminate on the tester.
iv) The highest light number illuminated will indicate the energiser’s open-circuit output voltage at no-load conditions.
Caution: To prevent damage to the MGG Electric Fence Tester, the output of high-voltage energisers should be measured for less than 1 minute.
TESTING THE FENCE LINE
i) Energise the fence line.
ii) Push the GROUND PROBE of the MGG Electric Fence Tester into soil near the fence line.
iii) Touch the fence line with the FENCE PROBE of the MGG Electric Fence Tester and observe the number of lights which illuminate on the tester.
iv) The highest light number illuminated will indicate the voltage output of the fence line at that particular point.
v) Repeat steps (i) – (iv) at different locations along the fence line to determine if the output is consistent. Variations in the readings are indicative of a fence line problem.
Related Products
SOLAR ELECTRIC FENCE ENERGISER 5KM LITHIUM UNIT #849
MGG EF-SRS6-150 Solar Electric Fence Energiser complete with stand and mains charger/adapterThis is ..
$NZ 235.00
Ex Tax: $NZ 204.35
Ex Tax: $NZ 204.35
SOLAR ELECTRIC FENCE ENERGISER 20KM LITHIUM UNIT #925
NOW BACK IN STOCK FOR IMMEDIATE DELIVERYThe MGG EF-SRS6-500, our most powerful all-in-one Solar Fenc..
$NZ 330.00
Ex Tax: $NZ 286.96
Ex Tax: $NZ 286.96
Electric Fence Energiser 50km 12VDC or Mains powered #926
This Is MGG’S most powerful energiser to date. Ideal for up to 100 km of fence wire.This Unit ..
$NZ 270.00
Ex Tax: $NZ 234.78
Ex Tax: $NZ 234.78
25Km Electric Fence Energiser 12V DC or mains powered #912
12V DC battery or mains using the adapter included. Ideal for lifestylers, horse and pony people as ..
$NZ 119.00
Ex Tax: $NZ 103.48
Ex Tax: $NZ 103.48
solar electric fence energiser 3km with variable output #966
MGG's latest model of solar electric fence energisers. Ideal for lifestylers for up to 3Km of clean ..
$NZ 139.00
Ex Tax: $NZ 120.87
Ex Tax: $NZ 120.87